-
Transfer Type Aseptic Sampling ValveThe bacteria sampling valve is a commonly used sampling valve, usually composed of two connected ball valves, which is characterized by safe and stable sampling.
-
Liquid Level ValveThe level gauge is mainly applied to the tank equipments. The two same gauges or two different gauges are assembled on the tank so that the liquid condition or capacity can be odserved and the...
-
Yogurt Sampling ValveThe valve seat opens inside of tank or other equipment that it can avoid opening by accident due to much pressure in the pipes.
-
Y Type Sampling ValveIts mainly applied to extract sample from tank or pipeline. It also can be assembled at the bottom of the tank or pipeline to drain away the waste liquid.
-
Straight Samping ValveThe valve seat opens inside of tank or other equipment that it can avoid opening by accident due to much pressure in the pipes.
-
Non Retention Samping ValveThe sampling valve is no dead angle-free design and the end face connected to the container does not has a dead zone phenomenon.
-
Pipeline Connection Aseptic Sampling ValveHow it works The sterile sampling valve is sterilized before and after each sampling.
-
Embedded Welding Aseptic Sampling ValveIts basic working principle is that when it is in the closed state, the thimble is pushed by spring tension or other pressure, and the sealant head is pressed against the opening of the tank wall...
-
Embedded Clamp Aseptic Sampling ValveThe structure of the aseptic sampling valve mainly includes a sealing rubber sleeve, a sample storage chamber, a sampling port, a stainless steel thimble, a spring, a thimble sleeve.
-
Lever Aseptic Sampling ValveThe working principle of the aseptic sampling valve: when it is in the closed state, rely on the spring tension or other pressure to push the thimble.
-
Pneumatic Aseptic Sampling ValveThe sterile sampling valve is remotely controlled by a drive device or manually operated by a handle.
-
Auto-resetting Aseptic Sampling Valve◆ The aseptic sampling valve is designed for sterilization before and after each sampling.
◆ Open to Sampling-Valve is opened by rotating the handle
Linear actuator that uses a profiled rail bearing and belt drive train to move heavy loads at high speeds. Loads up to 1,290 lbs (586 kg). MXE-S Screw Actuators...
Screw Driven Modular Linear Actuators use the finest acme and ball screws manufactured in the world. They allow for direct in-line motor mount with or without an in-line or parallel gear box....
Linear Screw Actuators With Low-Profile Guide Rails: drylin® SLW drylin® SLW/SAW are lead screw-driven actuators equipped with fully-supported guide rails, offering more rigidity and...
Nook Industries CC™ Linear Actuators are a combination of an electric motor and an acme screw or a high efficiency ball screw. They are designed to be ready to install directly into any...
B3S ball screw linear actuators have an enclosed ball bearing design that accomodates heavy loads, high bending moments and delivers long service life. The B3S ball screw linear actuator...
Food Industry Vacuum Lifters forCurved and Irregularly Shaped Items. Grip, lift, and move food as well as other items with curves, angles, and varied heights in food-processing plants. All of...


