-
Lever Aseptic Sampling ValveThe working principle of the aseptic sampling valve: when it is in the closed state, rely on the spring tension or other pressure to push the thimble.
-
Liquid Level ValveThe level gauge is mainly applied to the tank equipments. The two same gauges or two different gauges are assembled on the tank so that the liquid condition or capacity can be odserved and the...
-
Yogurt Sampling ValveThe valve seat opens inside of tank or other equipment that it can avoid opening by accident due to much pressure in the pipes.
-
Y Type Sampling ValveIts mainly applied to extract sample from tank or pipeline. It also can be assembled at the bottom of the tank or pipeline to drain away the waste liquid.
-
Straight Samping ValveThe valve seat opens inside of tank or other equipment that it can avoid opening by accident due to much pressure in the pipes.
-
Non Retention Samping ValveThe sampling valve is no dead angle-free design and the end face connected to the container does not has a dead zone phenomenon.
-
Pipeline Connection Aseptic Sampling ValveHow it works The sterile sampling valve is sterilized before and after each sampling.
-
Single Port Aseptic Sampling ValveWhen the sterile sampling valve is in the closed state, the thimble is pushed by spring tension or other pressure, and the sealant head is pressed against the opening of the tank wall by the...
-
Transfer Type Aseptic Sampling ValveThe bacteria sampling valve is a commonly used sampling valve, usually composed of two connected ball valves, which is characterized by safe and stable sampling.
-
Embedded Welding Aseptic Sampling ValveIts basic working principle is that when it is in the closed state, the thimble is pushed by spring tension or other pressure, and the sealant head is pressed against the opening of the tank wall...
-
Embedded Clamp Aseptic Sampling ValveThe structure of the aseptic sampling valve mainly includes a sealing rubber sleeve, a sample storage chamber, a sampling port, a stainless steel thimble, a spring, a thimble sleeve.
-
Auto-resetting Aseptic Sampling Valve◆ The aseptic sampling valve is designed for sterilization before and after each sampling.
◆ Open to Sampling-Valve is opened by rotating the handle
3/4 in. Full Port 600 WOG Brass Ball Valve with 3/4 in. Female Pipe Thread Hose Connection (426AFF) at Ferguson. ... Figure 426A 3/4 in. Full Port 600 WOG Brass Ball Valve with 3/4 in. Female Pipe...
Floating type Ball Valve Size: 1/2" to 1 1/4" (Solid SS316 Ball, Lever) ... - Also known as T port mixer valve or L port diverter valve. - NPT Threaded End Connection (ANSI B1.20.1). - High / Direct...
10 rows · The valve has a long end connection with barbs on the exterior, which bite into the inside of ......
3060-BV – 3/4” Garden Hose Thread Connection with Ball Valve (For low flow applications) Garden Hose Connectors are available for 3/4″ Garden Hose Thread (GHT) Spigots with Female Swivel GHT x Male...
With a ball-valve design, these valves can handle three times the flow of butterfly valves. Air-Driven On/Off Valves for Food and Beverage For food and beverage applications that require...
Shower Head High Pressure Rain Fixed Showerhead 5-Setting with Adjustable Metal Swivel Ball Joint - Relaxed Shower Experience Even at Low Water ... Easily installs fixed shower head with G 1/2...


